[2003slobra]

Okay, i know this type of crap is gay (bench racing), but I have to do it; Would a 03 cobra (2.76 upper, non ported, no lower, 453 rwhp, 480 rwtq) with an added 100 shot run with a c6z? I see a couple runnin around town lately, and you know you can never keep up with em all, but I will always try!! I bet i will still come up short, but wanted some opinions. (the numbers i put down are before the shot of course)

[VNMISS04]

Z06.

[BLK_03]

Assuming traction for both cars, the Cobra. A pullied, sprayed Eaton car with a good tune can be nasty.

[95BOSS]

with a good tune, a 100 shot along with your current numbers will send your torque curve through the roof!

[10SecSleeper]

What mph you running? With my car its a drivers race against a new z06...

[Z-eater]

BLK_03, on May 26 2009, 11:45 PM, said:

Assuming traction for both cars, the Cobra. A pullied, sprayed Eaton car with a good tune can be nasty.

good old times.

[2003slobra]

I trapped 119 but I have only been to the track twice, i know its got more in it. Thanks for the responses guys. Just got a little bored last night and decided to see what everyone thought. It will be a little ways off yet, but I would like to have bobcat do the tune for the shot so I am sure it will run well

[Z-eater]

My old cobra with 2.8 upper only no port and 100 shot was traping around 129,128mph I couldnt spray in 1st because bad tire spin but at the track I would go 91mph in the 1/8 and than 129 in the 1/4 spraying top of 2nd, 3rd and 4th. It felt like a different car on the bottle.

[Bigdaddy]

VNMISS04, on May 26 2009, 08:19 PM, said:

Z06.

+1

[2003slobra]

So z eater was that full weight? My race weight is like freakin 3900 lbs. If you trapped that high, I would think you would have beaten the c6z. Dont they trap like 121-123 ish or am i wrong? Thanks for all the comments guys, I was really just askin this for fun. I saw a beautiful silver c6z parked at a house very close to mine yesturday and got all mad that there was a way faster car in such a close proximity.

[Evil_GT]

VNMISS04, on May 26 2009, 09:19 PM, said:

Z06.

A cobra on a healthy shot will handle a Z06.

2003slobra, on May 27 2009, 12:04 PM, said:

So z eater was that full weight? My race weight is like freakin 3900 lbs. If you trapped that high, I would think you would have beaten the c6z. Dont they trap like 121-123 ish or am i wrong? Thanks for all the comments guys, I was really just askin this for fun. I saw a beautiful silver c6z parked at a house very close to mine yesturday and got all mad that there was a way faster car in such a close proximity.

A cobra on a 100 shot is nuts. Tony would know because he sprayed a 75/100 for quite some time, then even had a dirty shot on it.

Search (Mofobucs) on streetfire. Although he has a ported/2.93 Cobra, he sprays a 100-150 and even a 200 at times.

Here is a good one: This is on a 100 I believe. Dont forget this Z06 has Cam/LT/Tune.
http://videos.street...rayd_163096.htm

[olskool]

Z

This post has been edited by olskool: 27 May 2009 - 11:43 AM

[VNMISS04]

We can test it out when the Z gets new tires if ya want.

I love '03/'04 Cobras, but they are dogs compared to the Z's. Just my opinion having been around both. Even my brother's old stock Z beat my not-stock Cobra many times.

This post has been edited by VNMISS04: 27 May 2009 - 12:33 PM

[BLK_03]

VNMISS04, on May 27 2009, 01:17 PM, said:

We can test it out when the Z gets new tires if ya want.

I love '03/'04 Cobras, but they are dogs compared to the Z's. Just my opinion having been around both. Even my brother's old stock Z beat my not-stock Cobra many times.

Sorry sista. = )

I will take all this bullshit turbo crap off, put the eaton back on and show you what's up, lol.

A pulley'd/exhaust/tuned Cobra shouldn't have a problem with a stock C5Z. Add the bottle and it shouldn't have trouble with a C6Z either.

[5.0 Mustang Man]

If the Cobra doesnt win there are some driving problems or problems with the car. That thing will make nasty tourque, should beat the z hands down.

[kev92gt]

I would ask Z-eater because he has owned and raced both.

[VNMISS04]

BLK_03, on May 27 2009, 01:47 PM, said:

Sorry sista. = )

I will take all this bullshit turbo crap off, put the eaton back on and show you what's up, lol.

A pulley'd/exhaust/tuned Cobra shouldn't have a problem with a stock C5Z. Add the bottle and it shouldn't have trouble with a C6Z either.

Like I said, we can try it for the fun of it Besides, according to the ford guys, with every power adder possible on a car, you should be able to beat an NA car. lol **Waits for the lame 'but you have more cubes' debate to begin** :-P No putting it tween em for you fucker.

This post has been edited by VNMISS04: 27 May 2009 - 01:32 PM

[Evil_GT]

VNMISS04, on May 27 2009, 02:18 PM, said:

Like I said, we can try it for the fun of it Besides, according to the ford guys, with every power adder possible on a car, you should be able to beat an NA car. lol **Waits for the lame 'but you have more cubes' debate to begin** :-P No putting it tween em for you fucker.

Considering the cost of Cobra + Bolt ons + Bottle, it still doesnt even come close to the price of a Z.

[VNMISS04]

Evil_GT, on May 27 2009, 03:22 PM, said:

Considering the cost of Cobra + Bolt ons + Bottle, it still doesnt even come close to the price of a Z.

Now your playing the price card. Too funny...and cute too. Either way, I like both cars a lot. /end of my opinion in this thread since it's only going to turn into an argument. lol

Carry on. Original poster, if you want to race a mainly stock '06 Z06 for the fuck of it, pm me or issues.

This post has been edited by VNMISS04: 27 May 2009 - 02:37 PM

[Evil_GT]

VNMISS04, on May 27 2009, 03:26 PM, said:

Now your playing the price card. Too funny...and cute too. Either way, I like both cars a lot. /end of my opinion in this thread since it's only going to turn into an argument. lol

Carry on. Original poster, if you want to race a mainly stock '06 Z06 for the fuck of it, pm me or issues.

Luv ya too Steph

[VNMISS04]

Evil_GT, on May 27 2009, 03:29 PM, said:

Luv ya too Steph

[BLK_03]

VNMISS04, on May 27 2009, 02:18 PM, said:

Like I said, we can try it for the fun of it

I've already done it.

The posts I'm making aren't opinions, they are based on personal experience.

Now squeeze those motherf.....

[VNMISS04]

BLK_03, on May 27 2009, 03:30 PM, said:

I've already done it.

The posts I'm making aren't opinions, they are based on personal experience.

Now squeeze those motherf.....

Fuck your experience. You aren't very experienced in other areas.

Now, shut up before I pull a sn95guy's gf and use a strap on you bitch.

God, thats so wrong. I want to throw up even typing it. LOL

This post has been edited by VNMISS04: 27 May 2009 - 02:41 PM

[2003slobra]

damn i started a war!!!! I am going to need a clutch and 26 spline input before I get the bottle. I am trying to find one right now, but everyone knows how money is currently. As soon as i get one, i am going to approach either z eater or blk_03 (even though they don't know this yet) about the best way to piece together a good dry kit for a reasonable price. I want bobcat to tune it for new injectors and bap, so I will need some money there. Then i will gladly run a c6z to find out.



anyone got a used 26 spline input or clutch good to 700 ft lbs I could buy?

This post has been edited by 2003slobra: 27 May 2009 - 02:44 PM

[Z-eater]

VNMISS04, on May 27 2009, 01:17 PM, said:

We can test it out when the Z gets new tires if ya want.

I love '03/'04 Cobras, but they are dogs compared to the Z's. Just my opinion having been around both. Even my brother's old stock Z beat my not-stock Cobra many times.

I think its the driver error in your part.

[VNMISS04]

2003slobra, on May 27 2009, 03:33 PM, said:

damn i started a war!!!! I am going to need a clutch and 26 spline input before I get the bottle. I am trying to find one right now, but everyone knows how money is currently. As soon as i get one, i am going to approach either z eater or blk_03 (even though they don't know this yet) about the best way to piece together a good dry kit for a reasonable price. I want bobcat to tune it for new injectors and bap, so I will need some money there. Then i will gladly run a c6z to find out.

Fo shizzle.

Z-eater, on May 27 2009, 03:34 PM, said:

I think its the driver error in your part.

Dude, I wouldn't doubt it Fuck, Jim lost to a near stock 03 Cobra. Driver error and no tarz for the lose. I'm sure he'll glady race anyone though. I do when I have his car out. LOL I know he wants a rematch with Jill (redfire cobie chic) when he gets the tarz.

This post has been edited by VNMISS04: 27 May 2009 - 02:44 PM

[Z-eater]

2003slobra, on May 27 2009, 03:33 PM, said:

damn i started a war!!!! I am going to need a clutch and 26 spline input before I get the bottle. I am trying to find one right now, but everyone knows how money is currently. As soon as i get one, i am going to approach either z eater or blk_03 (even though they don't know this yet) about the best way to piece together a good dry kit for a reasonable price. I want bobcat to tune it for new injectors and bap, so I will need some money there. Then i will gladly run a c6z to find out.

Auto and a good tune and you dont need nitrous to beat a C6Z06 at the track.

[2003slobra]

I love the track, but i kind of want it for the street because the track (gateway) is 2.5 hours away

[COBRA CHICK]

VNMISS04, on May 27 2009, 03:26 PM, said:

Now your playing the price card. Too funny...and cute too. Either way, I like both cars a lot. /end of my opinion in this thread since it's only going to turn into an argument. lol

Carry on. Original poster, if you want to race a mainly stock '06 Z06 for the fuck of it, pm me or issues.

Want to try it again with you driving? This pulley only Cobra already beat it with your brother driving

[VNMISS04]

COBRA CHICK, on May 27 2009, 03:38 PM, said:

Want to try it again with you driving? This pulley only Cobra already beat it with your brother driving

See previous post. And sure I will if I have it out.